A tower ladder is a structure created for climbing that involves two long side-pieces joined up with at uniform interim by rungs or steps. It's very important to utilize the correct apparatus for the activity, and that incorporates aluminium tower ladders, which come in various sorts and sizes for various applications. It's additionally vital to practice extraordinary alert while utilizing a stepping ladders, as a fall from a ladder can prompt genuine damage and even passing.
Falls are the number one cause of fatalities in the construction industry and improper fall protection. Ladders are involved in 20 percent of fall injuries among workers and 81 percent of construction worker fall injuries industry wide. Utilizing tools and equipment that will eliminate the risk of anyone falling from height is how we plan for daily activities and send everyone home safe.
General Requirements
Workers must maintain three points of contact at all times when climbing or descending from a ladder
When feet are at or above the sixth rung from the bottom, 100 percent fall protection is required.
Metal ladders are prohibited on all job sites.
Ladders will not be used in a horizontal position for use as platforms, runways, or scaffolds.
Self-supporting portable ladders and non-supporting portable ladders must be capable of supporting at least four times the maximum intended load.
Ladder Safety Requirements
Ladders must be maintained free of oil, grease and other slipping hazards.
The area around the top and bottom of ladders must be kept clear of debris and obstructions that would present a tripping hazard.
Ladders must be used only on stable and level surfces unless secured to prevent accidental displacement.
Ladders placed in passageways, doorways or driveways, must be barricaded to keep the activities or traffic away from the ladder.
The top step of a stepladder must not be used as a work platform.
Housekeeping, Inspection and Repair
Electrical cords, air hoses, welding leads and other obstructions will not impede access at the top or bottom of ladder.
Should the ladder be located in an area susceptible to mud, water or snow, it will be inspected prior to use and relocated as needed.
A competent person will inspect ladders each shift for visible defects and after any situation that may have affected their safe use.
Portable and fixed ladders with structural defects must be withdrawn from service by immediately tagging it with "Do Not Use" or similar notices.
A ladder can also be removed from service by blocking it with plywood or other attachment that spans several rungs.
Comments